Driving around the city can be an enjoyable experience, but it can take a toll on your wheels. After a long trip, your wheels can become damaged and dirty with dust and debris. While cleaning them may provide temporary relief, the problem will likely go on.

Fortunately, there is a solution to this problem – ceramic coating. It can help protect your wheels from damage and keep them looking great for longer.

Why You Should Ceramic Coat Your Wheel?

You probably would have heard about the ceramic coating. It can protect your car’s paintwork, by acting as an invisible shield from, sunlight, UV rays, etc. But did you know that ceramic coatings can also be applied to your car’s wheels? By doing so, you can extend the life of your wheels and keep them looking shiny and new, even after years of use.

When it comes to safeguarding your wheels, ceramic coating can provide an added layer of protection from oil and the pesky dust that tends to accumulate on the wheels due to frequent brake applications.

Have you ever noticed the build-up of dust near the brakes? Every time you apply the brakes, the friction generated causes sand and dust to cling to the wheels. Over time, this accumulation can result in a permanent dusty appearance that detracts from your car’s overall aesthetic appeal. With ceramic coating, you can ensure that your wheels remain free from unsightly dust and maintain their polished look for years to come.

Preparing Your Wheels Before Ceramic Coating

If you want to give your car a long-lasting shine, ceramic coating is a great option. However, when it comes to coating your wheels, the process is a bit different than coating your car’s body. You need to prepare your wheels properly before applying ceramic coating, especially if they haven’t been cleaned in a while. It’s essential to give your entire car a thorough cleaning before starting the coating process. Be prepared to get your hands dirty if you decide to clean your car yourself. Alternatively, you can save yourself the hassle and bring your ride to the top ceramic coating professionals in St. Louis. They have the expertise and equipment to provide the essential cleaning and ceramic coating your car deserves, leaving it looking like new. Here’s how they prepare your car’s wheels for ceramic coating:

Dismantle the Wheels

Dismantling the wheels is the first thing you have to do. It’s important to take them off so that you can clean and coat them properly. It’s recommended that you work on one wheel at a time to ensure that you don’t miss any spots and to keep track of what you’ve done.

It’s best to keep the tires on the wheels while you work on them, as they can help keep the wheel flat and stable, depending on the model of the car. This way, you don’t have to worry about lining the floor with cardboard or rags. If you have a rolling wheel stand, it can make the job a lot easier, but it’s not necessary if you’re just working on your car in your driveway or garage.

Cleaning And Decontamination

Once you’ve taken apart the wheel, the next step is to give it a thorough cleaning. Proper cleaning techniques can make all the difference in achieving a flawless ceramic coating for your vehicle. By partnering with top ceramic coating services in St. Louis, you can ensure that your ride is looking its best. Here are the methods they can clean your ride’s wheel.

Acid-Based Wheel Cleaners

Acid-based cleaners are effective in breaking down grime and dirt on wheels, but they can be harmful to some types of wheels like chrome-plated or alloy wheels, even if they have a pH of 5.5 to 6 (with 7 being pH neutral).

pH Neutral Wheel Cleaners

pH-neutral wheel cleaners are the most commonly used by consumers. These cleaners contain agents that are pH neutral and work by breaking down brake dust and road grime through agitation when sprayed on the wheels. They also contain foaming agents and surfactants that help lift and remove debris.

Pressure Washer

For those with access to a pressure washer, this can be a time-saving tool for cleaning wheels. Use a wide-angle nozzle and keep the pressure moderate to avoid damaging the finish or causing water intrusion into sensitive areas like wheel bearings. Pre-treating the wheels with a cleaner and allowing them to dwell before rinsing can improve results.

Wheel Woolies

Wheel Woolies are specialized brushes with synthetic wool heads that are gentle yet effective at cleaning wheels. They’re particularly useful for reaching behind spokes and into tight spaces where traditional brushes may struggle. Pair them with a wheel cleaner for optimal results.

Choosing The Ceramic Coating For Your Wheel

After completing the task of cleaning your car’s wheels, it is recommended to apply a ceramic coating to enhance their durability and appearance. There are various types of ceramic coating methods available in the market that can be used to coat your car wheels. It is important to select the one that is most appropriate for your ride to achieve optimal results. Here are some of the best coating options available for your wheel

Nano-ceramic Coating

Nano-ceramic coatings are a type of protective layer that is applied to the surface of wheels using nanotechnology. This layer offers exceptional durability, as it bonds at a molecular level to create a hydrophobic barrier that repels water, dirt, and other contaminants.

SiO2 Ceramic Coatings

SiO2 ceramic coatings are another type of protective layer that is formulated using the properties of silica. This coating offers excellent heat resistance, making it an ideal choice for wheels that are subjected to high temperatures due to braking and friction. These coatings are known for their ease of application and can be layered for increased protection and shine.

Graphene Ceramic Coatings

Graphene ceramic coatings take protection to another level by incorporating graphene, a highly durable and flexible material, into the formulation. This advanced coating provides unparalleled strength and resistance to scratches, chips, and abrasions.

Hybrid Ceramic Coating

Hybrid ceramic coatings combine the benefits of traditional ceramic coatings with innovative additives to enhance performance. These coatings typically contain a blend of ceramic particles, polymers, and other protective agents. Hybrid ceramic coatings offer improved chemical resistance, making them resistant to harsh chemicals found in road grime and brake dust.

When you consult with wheel ceramic coating experts in St. Louis, they can help you choose the right coating option, that suits your car model and make.

How To Maintain Your Ceramic-Coated Wheels

Cleaning and polishing the wheels can be a difficult task, especially if there is caked-on brake dust. However, once the wheels are ceramic coated, maintenance becomes much easier. All you need to do is wash your car weekly, you can simply wash your wheels using the same car shampoo and a soft brush to get rid of any accumulated dust. This will easily remove the dust accumulated in your car.

Wrapping it Up,

If you’re looking for a reliable way to safeguard your vehicle’s wheels, ceramic coating is an outstanding choice. After the application of ceramic coating, your wheels can remain protected from various harmful elements such as dust, rust, and corrosion for an extended period, even up to several years. With ceramic coating, you can rest assured that your wheels will keep their shine and appearance, while also being shielded from potential damage.

Looking for wheel coating experts in St. Louis to protect your Wheel? Look no further than Auto Trim Restyling, Reach out to us today, for all your car needs.

Comments are closed.